SolarAmerica Questions? (832) 263-8055

HomePennsylvaniaFranklin County

Franklin County, Pennsylvania · Updated August 2026

Solar in Franklin County, Pennsylvania

What Franklin County homeowners pay for power today, what your roof would produce against it, and $0-down options if you qualify. Serving Chambersburg, Amberson, Blue Ridge Summit, Concord, Doylesburg, Dry Run, Fannettsburg, Fayetteville, Fort Loudon, Greencastle, Lemasters, Lurgan.

~21.1¢State average rate

Ranked #1 by Solar Power World · Inc. 5000 · 20,000+ installations

The numbers

What Franklin County pays for power

MeasureCurrentDetail
UtilityMultiple utilities serve PennsylvaniaEnter your ZIP to identify yours
State average rate~21.1¢EIA statewide residential average, Aug 2026
Peak sun hours4.2/dayRegional annual average (NREL)
Production per kW~1,226 kWh/yrTypical south-facing roof, minimal shading
9 kW system output~11,034 kWh/yrBefore shading and orientation losses
Annual value at this rate~$2,328What that production is worth against your rate

The 21.1¢ figure is the Pennsylvania statewide average residential price published by the U.S. Energy Information Administration for August 2026. It is a state average, not a verified tariff figure for one utility. Utilities serving Pennsylvania include PPL Electric Utilities, PECO Energy, Duquesne Light, Met-Ed. Enter your ZIP and we will match your address to the right one and price against your actual bill.

Figures as published August 2026. Rates change on published schedules — check your own bill for the rate that applies to your account.

Where we work in Franklin County

Towns and ZIP codes we serve in Franklin County

Chambersburg, Amberson, Blue Ridge Summit, Concord, Doylesburg, Dry Run, Fannettsburg, Fayetteville, Fort Loudon, Greencastle, Lemasters, Lurgan.

ZIP codes: 17201, 17202, 17210, 17214, 17217, 17219, 17220, 17221, 17222, 17224, 17225, 17231, 17232, 17235, 17236, 17237, 17244, 17246, 17247, 17250, 17251, 17252, 17254, 17256, 17261, 17262, 17263, 17265, 17268, 17270, 17271, 17272.

If your ZIP is not listed it does not mean we cannot serve you — Franklin County has more municipalities than we can list here. Enter your ZIP above and it will tell you.

What your roof actually produces here

Franklin County averages about 4.2 peak sun hours a day. A well-oriented kilowatt of panels produces roughly 1,226 kilowatt-hours a year in this part of Pennsylvania. A typical 9 kW residential system therefore produces around 11,034 kilowatt-hours annually. At a rate near 21.1¢, that production is worth roughly $2,328 a year before any incentive.

Those are pre-shading numbers. Trees, roof pitch and orientation move them, sometimes a lot, which is why we look at your specific roof rather than quoting from a county average.

Permitting and interconnection in Franklin County

Permits for solar in Franklin County are issued locally rather than at the state level, so requirements vary between municipalities. Interconnection is handled by your utility and runs on its own timeline after the permit clears. We manage both, and we tell you what the local process looks like before anything is scheduled.

Every Pennsylvania utility rate, for context

UtilityAll-in rateMonthly at 1,000 kWh
PPL Electric Utilities~19.2¢$192 a month at 1,000 kWh
PECO Energy~20.0¢$200 a month at 1,000 kWh
Duquesne Light~23.1¢$231 a month at 1,000 kWh
Met-Ed~19.0¢$190 a month at 1,000 kWh
Penelec~21.1¢$211 a month at 1,000 kWh
West Penn Power~19.5¢$195 a month at 1,000 kWh
Penn Power~19.5¢$195 a month at 1,000 kWh
UGI Utilities~19.5¢$195 a month at 1,000 kWh

You do not choose your utility — it is set by your address. This is context for what Franklin County pays relative to the rest of the state, not a menu.

What has moved recently

UtilityChangeEffective
Penelec+11.9%June 1, 2026
West Penn Power+10.3%June 1, 2026
Met-Ed+7.6%June 1, 2026
Penn Power+6.9%June 1, 2026
PPL Price to Compare+66% since 2020cumulative

What Pennsylvania offers a homeowner

Pennsylvania has no state solar credit, no rebate, no sales tax exemption and no property tax exemption. SRECs trade in the low $20s and they go to the owner of the system, not to a PPA customer. What Pennsylvania does have is 1:1 retail net metering — the best export structure in the region, and almost nobody advertises it.

How export credit works here

1:1 retail net metering — what you export is credited at the full retail rate.

Outages and storage in Franklin County

Solar alone does not run your house during a blackout — a grid-tied inverter has to disconnect when the grid goes down, for line-worker safety. Adding storage and the right switching changes that. Whether storage also makes financial sense in Pennsylvania depends on the export credit above: where exports are credited at the full retail rate there is no arbitrage to capture and storage is a resilience purchase.

Two ways to pay for solar, and they are very different

If you buy the system

You own the equipment, you keep any renewable energy credits, and you carry the maintenance responsibility. Installed pricing varies by roof, shading and system size.

If you use a PPA

$0 upfront. We install and own the system; you buy the power it produces at a rate set in your agreement, and you only pay for what it actually generates. The system owner carries maintenance for the life of the agreement.

The residential federal tax credit (25D) ended for systems purchased after December 31, 2025.

You will still see ads promising a 30% credit that “ends December 31.” Read the date on them. If you buy a system today as a homeowner, you cannot claim that credit. What remains applies to the owner of the system — which, under a PPA, is us. SolarAmerica does not provide tax advice; talk to your tax professional about your situation.

Who you would be working with

SolarAmerica

#1Ranked by Solar Power World
20,000+Installations completed
16+States with installations
Inc. 5000Fastest-growing companies

We design your system and manage the project; installation is performed by vetted licensed partners in your area.

Franklin County questions

The things people actually ask

Does solar make financial sense in Franklin County?

It depends on your roof and your rate, not on the county. Franklin County averages about 4.2 peak sun hours a day, so a well-oriented kilowatt of panels produces roughly 1,226 kilowatt-hours a year here. Against a rate near 21.1¢ that production has real value — but shading, roof pitch and your actual usage move the number, which is why we look at your address instead of quoting a county average.

Which utility serves Franklin County?

Pennsylvania is served by several utilities, including PPL Electric Utilities, PECO Energy, Duquesne Light, Met-Ed. Your bill names yours at the top. Enter your ZIP and we will match your address to the right one.

Where does the 21.1¢ figure come from?

It is the Pennsylvania statewide average residential price published by the U.S. Energy Information Administration, as of August 2026. It is a state average rather than a verified figure for one utility's tariff, so treat it as a starting point — your own bill is the accurate number.

Does SolarAmerica install the system?

We design the system and manage the project. Installation is performed by licensed partners in your area, and you will know who is coming to your roof before anything is scheduled.

What does $0 upfront actually mean?

Under a power purchase agreement we install and own the system and you buy the power it produces at a rate set in your agreement. There is no purchase and no loan. The residential federal credit (25D) ended for systems purchased after December 31, 2025; what remains applies to the owner of the system, which under a PPA is us.

See what your roof in Franklin County actually adds up to

About 60 seconds. No cost, no obligation, and we will tell you if solar does not make sense for your home.

Ranked #1 by Solar Power World · 20,000+ installations · Licensed installers

Sources

Where these numbers come from

Every figure on this page is drawn from a public filing, a published rate schedule or a federal dataset. We update it when the underlying source changes.

Last updated August 2026.